Derwent Group logo - instrumentation, calibration, storage and safety equipment THE DERWENT GROUP
Instrumentation, calibration, storage and safety equipment
montage of Derwent Group products Call direct on +44 (0) 1332 834141 phone
Load Cells > Load cells
'S' Beam Load Cells
'S' Beam Load Cells
The ‘S’ Beam range of tension load cells are suitable for smaller Silo, vessel and tank weighing applications.The load cell can be supplied as a fully welded stainless steel or tool steel.Capacities from 10kg to 5,000kg.

Fitting options available including threaded bar, rod end bearing and eyebolts. ATEX and OIML option available.

Capacities from 10 kg to 5,000 kg.
Matched outputs for simplified Installation.
High accuracy.
Fully sealed up to IP66.
CE Approval.

Capacities (Kg)

10, 20, 25, 50, 100, 150, 200, 250, 500, 750, 1000, 1500, 2000, 2500, 5000.

Sample specification for a S-Beam loadcell
Full scale output: 3mV/V Nom
Safe overload: 150%
Creep (in 20 mins): 0.03% max
Non-linearity: 0.03% max
Hysteresis: 0.02% max
Non-repeatability: 0.02% max
Max operating temp: +80 deg C
Min operating temp: -20 deg C
Insulation resistance: ≥ 2000MΩ
Zero balance: +/- 1% F.S.
Supply voltage: 6-12 v (DC or AC)
Max voltage: 15v
Output resistance: 350+/-10Ω
Input resistance: 390+/-20Ω
Fully sealed as standard (IP66)
CE approval
Optional - fully welded stainless steel version(IP68)
For further details, or to discuss your particular requirements, contact us direct by telephone on +44 (0) 1332 834141, by email at or through our message form.